Aug 6, 2021 | ISO Calibration, Pre Press and Colour Management, X Rite i1 Range
The X Rite i1 Pro 3 basic is a Spectrophotometer designed for the linearisation of printers and proofing devices. Proofing Rips supported include EFI, Oris, Apogee X and GMG.
Wide format RIPs are also supported. Please contact us to confirm if your RIP is compatible.
Used in conjunction with Profile creation and editing software such as X Rite i1 Publish, the creation of professional CMYK and RGB ICC profiles can be achieved.
The device can also be used to calibrate digital presses and monitors.
Aug 6, 2021 | X Rite i1 Range
i1Publish enables the accurate creation of custom ICC profiles for cameras, monitors, digital projectors, scanners and printers, ensuring colour accuracy from capture to output.
It can connect to the new i1 Pro3 and iO3 table or the older i1 Pro2 and i1 Pro2 table.
The stand alone software runs on MAC or PC and can also drive the i1 ISIS2 for those customers that like the “feed through” measurement devices
Aug 5, 2021 | Colour Management, ISO 12647, Pre Press and Colour Management, Repro & General Pre-Press, X Rite i1 Range
The New X Rite i1 iO3 Table enables automatic measurements to be made when connected to the i1 Pro3 or Pro3 plus spectrophotometer.
Results are more consistent than hand scanning and significant time is saved.
It measures as fast as the X Rite ISIS but allows measurements on substrates up to 10mm thick, including photo paper, card stock and ceramic.
Simply plug in your i1Pro or i1Pro 2, align the test chart, and the scanning table does the rest.
When used in conjunction with i1 Profiler software accurate ICC profiles can be created.
Aug 5, 2021 | ISO Calibration
Proofsign software verifies that Proofing devices are printing to the Fogra standards. It has now been amalgamated within Presssign 10
Connected to an i1 Pro 2 Spectrophotometer, a bar is printed on the proofing device and scanned with the i1.
The Software gives Delta E values compared with the known ISO standards for CMYK primaries, paper colour and a range of colours throughout the gamut.
A printed pass sticker can be output proving ISO verification.
Aug 5, 2021 | ISO Calibration, Pre Press and Colour Management
Press Sign ISO 12647 accreditation software.
Connected to an X-Rite i1 One Pro 2 Spectrophotometer or an X Rite Exact Scan, the Software enables the self certification to the ISO 12647 standard.
Specifications of CMYK primary ink colour,dot gains, trapping, grey balance and paper white are given for each standard.
By scanning a colour bar with the Eye One or Exact a report is produced with a simple scoring system and suggestions are given for primary CMYK densities and dot gain curve amendments.
The Pro version can accept Data directly from Closed loop press solutions.
NB. Pressign 10 cannot support the new i1 Pro 3 spectrophotometer but TSS still have a number of i1 Pro2 devices available.
